Block paving sealing in Southend-on-Sea: what to expect
Southend-on-Sea has a big mix of housing, from older terraces near the centre to newer estates further out, so no two drives here start from the same ground.
Flat ground across much of the East means falls have to be built in carefully so water does not sit on the drive.
How much does a block paving sealing job cost in Southend-on-Sea?
In the East of England, a block paving sealing job usually costs £5.50–£16 per m² including VAT. For a 50 m² drive, that is roughly £265–£790. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5.50–£16 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5.50 per m² |
| Clean and re-sand | £5.50–£11 per m² |
| Clean, re-sand and seal | £8.50–£20 per m² |
Guide figures for the East of England, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Sealing block paving means applying a clear liquid sealer to clean, dry paving. A good sealer soaks into the blocks and the jointing sand, binding the sand so it does not wash out, reducing staining and making the surface easier to keep clean. Some sealers also deepen the colour or leave a light sheen.
- Sealer applied evenly by roller or low-pressure sprayer
- Edges, walls and doors protected
- Drying time and a date when cars can return
- Check that the paving is clean, re-sanded and dry
- Second coat where the product requires it
Before we price your block paving sealing job
- How much joint sand is left
- Which sealer finish suits a slope or patio
- Type of block and its age
- Shade and drainage, which affect regrowth
- Whether the paving is permeable (no sand, no sealing with the wrong product)
From enquiry to finished paving
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
How we work
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Sealing in Southend-on-Sea: questions
How often should block paving in Southend-on-Sea be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
How much does a block paving sealing job cost in Southend-on-Sea?
Guide price for Southend-on-Sea: £5.50–£16 per m² including VAT, with a minimum charge for small areas.
Sealing near Southend-on-Sea
Nearby towns we cover for sealing, and sealing across Essex:
- Sealing in Rayleigh
- Sealing in Canvey Island
- Sealing in South Benfleet
- Sealing in Pitsea
- Sealing in Wickford
- Sealing in Basildon
