How much does a block paving sealing job cost in Dundee and Angus?
For Dundee and Angus, our guide is £5–£15 per m² including VAT, so a 50 m² drive is likely to be £250–£750. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5–£15 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
Guide figures for Scotland, checked 9 November 2026.
Towns we cover in Dundee and Angus
Choose a town for local prices and details for sealing:
What does a block paving sealing job involve?
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
In Scotland, front paving must be porous or drain within the property whatever its size, so drainage is part of every design.
- Check that the paving is clean, re-sanded and dry
- Sealer applied evenly by roller or low-pressure sprayer
- Drying time and a date when cars can return
- Second coat where the product requires it
- Edges, walls and doors protected
How we find the cause
- Whether any blocks are loose or sunken first
- Shade and drainage, which affect regrowth
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- Moss, algae, weeds and oil staining
- Walls, doors and planting to protect
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Sealing in Dundee and Angus: questions
How often should block paving in Dundee and Angus be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
How much does a block paving sealing job cost in Dundee and Angus?
Guide price for Dundee and Angus: £5–£15 per m² including VAT, with a minimum charge for small areas.
Do you cover Dundee, Arbroath and Forfar?
Yes. We cover all of Dundee and Angus, including Dundee, Arbroath and Forfar.
