Block paving sealing in Abergele: the local picture
Around Abergele, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.
Hilly streets in much of Wales mean many drives slope, which shapes the falls, the edging and the water route.
How much does a block paving sealing job cost in Abergele?
Guide price in Abergele: £4.50–£14 per m² including VAT, which puts a 50 m² drive at about £235–£700. These are Wales guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £4.50–£14 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£4.50 per m² |
| Clean and re-sand | £4.50–£9.50 per m² |
| Clean, re-sand and seal | £7.50–£19 per m² |
Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Drying time and a date when cars can return
- Edges, walls and doors protected
- Sealer applied evenly by roller or low-pressure sprayer
- Check that the paving is clean, re-sanded and dry
- Second coat where the product requires it
Before we price your block paving sealing job
- Which sealer finish suits a slope or patio
- Moss, algae, weeds and oil staining
- Type of block and its age
- Whether any blocks are loose or sunken first
- Whether the paving is permeable (no sand, no sealing with the wrong product)
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Why choose Block Paving Contractors
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Sealing in Abergele: questions
How often should block paving in Abergele be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
How much does a block paving sealing job cost in Abergele?
Guide price for Abergele: £4.50–£14 per m² including VAT, with a minimum charge for small areas.
Do you cover Rhyl, Colwyn Bay and Prestatyn?
Yes. We cover Abergele and the places around it, including Rhyl, Colwyn Bay and Prestatyn, and the rest of Clwyd.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Sealing near Abergele
Nearby towns we cover for sealing, and sealing across Clwyd:
- Sealing in Rhyl
- Sealing in Colwyn Bay
- Sealing in Prestatyn
- Sealing in Deganwy
- Sealing in Llandudno
- Sealing in Flint
