England · Repairs

Block paving repairs in Tyne and Wear

Before you replace a block drive in Tyne and Wear, ask whether it can be repaired: re-levelling and re-laying often cost far less than new paving.

  • 13 towns listed
  • £180–£590 inc VAT
  • Free survey for new paving
Gloved hands lifting a cracked block out of a grey block paved driveway to replace it

How much does a block paving repair cost in Tyne and Wear?

Guide price in Tyne and Wear£180–£590Including VAT at 20%

In the North East, a block paving repair usually costs £180–£590 including VAT. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.

ItemGuide price inc VAT
Small repair (a few blocks or a short trench)£180–£590
Sunken or rutted patch repaired£270–£1,100
Lift and re-lay on a sound base£30–£70 per m²
Lift and re-lay with sub-base rebuilt£55–£100 per m²

Guide figures for the North East, checked 9 November 2026.

Towns we cover in Tyne and Wear

Choose a town for local prices and details for repairs:

What is included?

Block paving repairs fix local damage: cracked or broken blocks, loose blocks that rock, oil or rust stains, and trenches left after a utility company or builder has dug through the drive. Because each block is separate, a damaged area can be lifted, the bed corrected and the blocks relaid or replaced, without breaking out the whole drive.

Former colliery ground and clay soils occur across the North East, so the survey checks for soft spots before the sub-base depth is set.

  • Laying course corrected and re-screeded
  • Re-jointing and compaction of the repaired area
  • Damaged blocks cut out without breaking neighbours
  • Replacement blocks matched as closely as possible, or sound blocks re-used
  • Diagnosis from photos or a visit

How we find the cause

  • How much of the area needs lifting to blend the repair
  • Whether the edging has moved or was never set in concrete
  • Replacement blocks or hidden blocks to swap in
  • Falls, so water does not collect again
  • Whether a drain or gully is leaking under the paving

How it works

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

Repairs in Tyne and Wear: questions

Do you cover Newcastle upon Tyne, Sunderland and South Shields?

Yes. We cover all of Tyne and Wear, including Newcastle upon Tyne, Sunderland and South Shields.

Can you send someone just to look?

For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.

How much does a block paving repair cost in Tyne and Wear?

Our guide is £180–£590 including VAT. Small repairs are often priced from photos.

Why does block paving sink?

Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.

Neighbouring areas

Next step

Get a guide price in two minutes

Answer four quick questions for an instant guide price, then book a free survey to fix it in writing. Repairs and cleaning can often be priced from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote