Kent · Repairs

Block paving repairs in Herne Bay

Before you replace a block drive in Herne Bay, ask whether it can be repaired: re-levelling and re-laying often cost far less than new paving.

  • Postcodes CT6
  • £215–£700 inc VAT
  • Free survey for new paving
Gloved hands lifting a cracked block out of a grey block paved driveway to replace it

Block paving repairs in Herne Bay: the local picture

Herne Bay is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.

Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.

How much does a block paving repair cost in Herne Bay?

Guide price in Herne Bay£215–£700Including VAT at 20%

In the South East, a block paving repair usually costs £215–£700 including VAT. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.

ItemGuide price inc VAT
Small repair (a few blocks or a short trench)£215–£700
Sunken or rutted patch repaired£320–£1,300
Lift and re-lay on a sound base£40–£85 per m²
Lift and re-lay with sub-base rebuilt£65–£120 per m²

Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Most small repairs can be priced from clear photos and a measurement. If the problem is a symptom of something deeper, such as a failed edge or a soft sub-base, we will say so rather than patching over it, and price the proper fix alongside.

  • Damaged blocks cut out without breaking neighbours
  • Diagnosis from photos or a visit
  • Replacement blocks matched as closely as possible, or sound blocks re-used
  • Re-jointing and compaction of the repaired area
  • Laying course corrected and re-screeded

Before we price your block paving repair

  • Replacement blocks or hidden blocks to swap in
  • Falls, so water does not collect again
  • Whether a drain or gully is leaking under the paving
  • How much of the area needs lifting to blend the repair
  • Condition and thickness of your existing blocks

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Why choose Block Paving Contractors

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Repairs in Herne Bay: questions

Do you cover Whitstable, Canterbury and Faversham?

Yes. We cover Herne Bay and the places around it, including Whitstable, Canterbury and Faversham, and the rest of Kent.

Why does block paving sink?

Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.

How much does a block paving repair cost in Herne Bay?

Our guide is £215–£700 including VAT. Small repairs are often priced from photos.

Can you repair block paving in Herne Bay without replacing it?

Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.

Repairs near Herne Bay

Nearby towns we cover for repairs, and repairs across Kent:

Other block paving services in Herne Bay

Or see all block paving services in Herne Bay.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Herne Bay, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote