Hampshire · Repairs

Block paving repairs in Portsmouth

If your drive or patio in Portsmouth has dips, ruts or broken blocks, we can usually re-use your own blocks so the repair matches.

  • Postcodes PO1, PO5, PO2
  • £215–£700 inc VAT
  • Free survey for new paving
Gloved hands lifting a cracked block out of a grey block paved driveway to replace it

Block paving repairs in Portsmouth: the local picture

Portsmouth has a big mix of housing, from older terraces near the centre to newer estates further out, so no two drives here start from the same ground.

Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.

How much does a block paving repair cost in Portsmouth?

Guide price in Portsmouth£215–£700Including VAT at 20%

Most block paving repair quotes in the South East fall within £215–£700 including VAT, with any extras listed separately on your quote.

ItemGuide price inc VAT
Small repair (a few blocks or a short trench)£215–£700
Sunken or rutted patch repaired£320–£1,300
Lift and re-lay on a sound base£40–£85 per m²
Lift and re-lay with sub-base rebuilt£65–£120 per m²

Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.

What does a block paving repair involve?

Block paving repairs fix local damage: cracked or broken blocks, loose blocks that rock, oil or rust stains, and trenches left after a utility company or builder has dug through the drive. Because each block is separate, a damaged area can be lifted, the bed corrected and the blocks relaid or replaced, without breaking out the whole drive.

  • Damaged blocks cut out without breaking neighbours
  • Laying course corrected and re-screeded
  • Diagnosis from photos or a visit
  • Replacement blocks matched as closely as possible, or sound blocks re-used
  • Re-jointing and compaction of the repaired area

How we find the cause

  • Falls, so water does not collect again
  • Condition and thickness of your existing blocks
  • Trees, roots and past trenches
  • What caused the dip or movement: base, laying course, edging or drains
  • How much of the area needs lifting to blend the repair

How it works

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

How we work

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Repairs in Portsmouth: questions

Why does block paving sink?

Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.

Can you send someone just to look?

For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.

Do you cover Gosport, Fareham and Havant?

Yes. We cover Portsmouth and the places around it, including Gosport, Fareham and Havant, and the rest of Hampshire.

How much does a block paving repair cost in Portsmouth?

Our guide is £215–£700 including VAT. Small repairs are often priced from photos.

Repairs near Portsmouth

Nearby towns we cover for repairs, and repairs across Hampshire:

Other block paving services in Portsmouth

Or see all block paving services in Portsmouth.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Portsmouth, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote