Planning a block paving repair in Ilkeston
Ilkeston is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.
Block drives laid twenty or thirty years ago are often ready for re-laying rather than replacing, because sound blocks outlast a weak base.
How much does a block paving repair cost in Ilkeston?
In the East Midlands, a block paving repair usually costs £200–£650 including VAT. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Small repair (a few blocks or a short trench) | £200–£650 |
| Sunken or rutted patch repaired | £300–£1,200 |
| Lift and re-lay on a sound base | £35–£80 per m² |
| Lift and re-lay with sub-base rebuilt | £60–£110 per m² |
Guide figures for the East Midlands, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paving repair involve?
Block paving repairs fix local damage: cracked or broken blocks, loose blocks that rock, oil or rust stains, and trenches left after a utility company or builder has dug through the drive. Because each block is separate, a damaged area can be lifted, the bed corrected and the blocks relaid or replaced, without breaking out the whole drive.
- Diagnosis from photos or a visit
- Replacement blocks matched as closely as possible, or sound blocks re-used
- Re-jointing and compaction of the repaired area
- Laying course corrected and re-screeded
- Damaged blocks cut out without breaking neighbours
Before we price your block paving repair
- How much of the area needs lifting to blend the repair
- What caused the dip or movement: base, laying course, edging or drains
- Trees, roots and past trenches
- Replacement blocks or hidden blocks to swap in
- Whether the edging has moved or was never set in concrete
What happens next
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
What you can expect from us
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Repairs in Ilkeston: questions
Can you repair block paving in Ilkeston without replacing it?
Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
How much does a block paving repair cost in Ilkeston?
Our guide is £200–£650 including VAT. Small repairs are often priced from photos.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Repairs near Ilkeston
Nearby towns we cover for repairs, and repairs across Derbyshire:
- Repairs in Heanor
- Repairs in Long Eaton
- Repairs in Ripley
- Repairs in Derby
- Repairs in Belper
- Repairs in Alfreton
