England · Patios

Block paved patios in Tyne and Wear

Block paved patios in Tyne and Wear: dug out, laid on a compacted base, edged in concrete and laid to fall away from the house so rain runs off, not in.

  • 13 towns listed
  • £70–£125 per m² inc VAT
  • Free survey for new paving
Buff and charcoal block paved patio in basketweave with a garden table and planters

How much does a block paved patio cost in Tyne and Wear?

Guide price in Tyne and Wear£70–£125 per m²Including VAT at 20%

Expect block paved patios in Tyne and Wear to come in at around £70–£125 per m², including VAT at 20%. As an example, a 20 m² patio usually comes to between £1,650 and £2,900.

ItemGuide price inc VAT
Block paved patio (concrete block)£70–£125 per m²
Breaking out an old surface£9–£35 per m²
Edging or kerb, bedded and haunched£18–£45 per metre
Step with block or brick riser and paved tread£160–£320 per step
Typical channel drain run£320–£900

Guide figures for the North East, checked 9 November 2026.

Towns we cover in Tyne and Wear

Choose a town for local prices and details for patios:

What does a block paved patio involve?

A block paved patio is a garden seating or dining area paved with concrete or clay blocks on a compacted base. Because a patio carries people and furniture rather than cars, the sub-base is thinner than for a drive, but the falls, edging and drainage matter just as much.

Former colliery ground and clay soils occur across the North East, so the survey checks for soft spots before the sub-base depth is set.

  • Optional sealer
  • Layout marked out with you, including steps and doors
  • Falls away from the house and doors
  • Dig-out and compacted sub-base (around 100 mm for foot traffic)
  • Jointing sand and compaction

What the survey covers

  • Levels against the damp-proof course and door thresholds
  • Access for a mini-digger and how waste leaves the garden
  • Outside taps, lights and cables
  • Trees and roots near the paving
  • Ground conditions and how deep the dig must be

Do you need permission for a block paved patio in Tyne and Wear?

A patio or path behind the house does not usually need planning permission. Raised patios, listed buildings and flats can be different, so we check on the survey.

Paving in front of the house follows the front-garden rules: in England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary.

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Patios in Tyne and Wear: questions

What happens to my old patio or lawn?

Old slabs, concrete or turf are dug out and taken away, listed as its own line on your quote.

How long does a block paved patio take?

Most patios and paths take two to five working days, depending on the size, any steps and the dig. Your quote gives the expected duration.

Can the paving be level with the back door?

Paving normally sits at least 150 mm below the damp-proof course. A level step-out needs a drainage channel against the house and careful detailing, which we agree on the survey.

How much does a block paved patio cost in Tyne and Wear?

Our guide for Tyne and Wear is £70–£125 per m² including VAT, so a 20 m² patio is usually about £1,650–£2,900. Your fixed price follows the survey.

Neighbouring areas

Next step

Get a guide price in two minutes

Answer four quick questions for an instant guide price, then book a free survey to fix it in writing. Repairs and cleaning can often be priced from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote