How much does a block paved patio cost in Lancashire?
For Lancashire, our guide is £80–£140 per m² including VAT, so a 20 m² patio is likely to be £1,850–£3,200. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Block paved patio (concrete block) | £80–£140 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Step with block or brick riser and paved tread | £180–£350 per step |
| Typical channel drain run | £350–£1,000 |
Guide figures for the North West, checked 9 November 2026.
Towns we cover in Lancashire
Choose a town for local prices and details for patios:
- Preston
- Burnley
- Blackburn
- Blackpool
- Morecambe
- Lancaster
- Lytham St Annes
- Skelmersdale
- Leyland
- Accrington
- Chorley
- Darwen
- Thornton-Cleveleys
- Nelson, Lancashire
- Fleetwood
- Ormskirk
- Rawtenstall
- Colne
What is included?
Block suits patios that join a block drive or path, small or awkward spaces where large slabs would need too many cuts, and gardens where you want a pattern such as basketweave or a circle feature. We lay patios to fall away from the house and below the damp-proof course, with edging that stops the blocks creeping into the lawn.
The North West is one of the wetter parts of England, so falls, channel drains and permeable options matter more than usual.
- Dig-out and compacted sub-base (around 100 mm for foot traffic)
- Falls away from the house and doors
- Blocks in your pattern, edges and cuts
- Layout marked out with you, including steps and doors
- Optional sealer
What the survey covers
- Ground conditions and how deep the dig must be
- Levels against the damp-proof course and door thresholds
- Edges against lawns, beds, fences and walls
- Manhole and inspection covers in the area
- Trees and roots near the paving
Do you need permission for a block paved patio in Lancashire?
A patio or path behind the house does not usually need planning permission. Raised patios, listed buildings and flats can be different, so we check on the survey.
Paving in front of the house follows the front-garden rules: in England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary.
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Patios in Lancashire: questions
Do you cover Preston, Burnley and Blackburn?
Yes. We cover all of Lancashire, including Preston, Burnley and Blackburn.
Can the paving be level with the back door?
Paving normally sits at least 150 mm below the damp-proof course. A level step-out needs a drainage channel against the house and careful detailing, which we agree on the survey.
How much does a block paved patio cost in Lancashire?
Our guide for Lancashire is £80–£140 per m² including VAT, so a 20 m² patio is usually about £1,850–£3,200. Your fixed price follows the survey.
Do I need planning permission for a block paved patio in Lancashire?
Not usually for a patio or path behind the house. Raised patios, listed buildings and flats can be different, and paving in front of the house follows the front-garden rules. In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary.
