England · Patios

Block paved patios in Bedfordshire

If you are in Bedfordshire (LU1, LU2, LU3, LU4) and want a block paved patio, we will measure up, check the levels against the house and give you a written, itemised price.

  • 6 towns listed
  • £85–£145 per m² inc VAT
  • Free survey for new paving
Buff and charcoal block paved patio in basketweave with a garden table and planters

How much does a block paved patio cost in Bedfordshire?

Guide price in Bedfordshire£85–£145 per m²Including VAT at 20%

Expect block paved patios in Bedfordshire to come in at around £85–£145 per m², including VAT at 20%. As an example, a 20 m² patio usually comes to between £1,950 and £3,400.

ItemGuide price inc VAT
Block paved patio (concrete block)£85–£145 per m²
Breaking out an old surface£11–£40 per m²
Edging or kerb, bedded and haunched£20–£55 per metre
Step with block or brick riser and paved tread£190–£370 per step
Typical channel drain run£370–£1,050

Guide figures for the East of England, checked 9 November 2026.

Towns we cover in Bedfordshire

Choose a town for local prices and details for patios:

What does a block paved patio involve?

A block paved patio is a garden seating or dining area paved with concrete or clay blocks on a compacted base. Because a patio carries people and furniture rather than cars, the sub-base is thinner than for a drive, but the falls, edging and drainage matter just as much.

Clay soils are common in parts of the East of England, so drainage and sub-base depth get extra attention.

  • Falls away from the house and doors
  • Blocks in your pattern, edges and cuts
  • Layout marked out with you, including steps and doors
  • Dig-out and compacted sub-base (around 100 mm for foot traffic)
  • Jointing sand and compaction

What the survey covers

  • Ground conditions and how deep the dig must be
  • Levels against the damp-proof course and door thresholds
  • Manhole and inspection covers in the area
  • Block range, colour, pattern and border to suit the house
  • Trees and roots near the paving

Do you need permission for a block paved patio in Bedfordshire?

A patio or path behind the house does not usually need planning permission. Raised patios, listed buildings and flats can be different, so we check on the survey.

Paving in front of the house follows the front-garden rules: in England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary.

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Patios in Bedfordshire: questions

Do I need planning permission for a block paved patio in Bedfordshire?

Not usually for a patio or path behind the house. Raised patios, listed buildings and flats can be different, and paving in front of the house follows the front-garden rules. In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary.

How long does a block paved patio take?

Most patios and paths take two to five working days, depending on the size, any steps and the dig. Your quote gives the expected duration.

Do you cover Luton, Bedford and Dunstable?

Yes. We cover all of Bedfordshire, including Luton, Bedford and Dunstable.

How much does a block paved patio cost in Bedfordshire?

Our guide for Bedfordshire is £85–£145 per m² including VAT, so a 20 m² patio is usually about £1,950–£3,400. Your fixed price follows the survey.

Neighbouring areas

Next step

Get a guide price in two minutes

Answer four quick questions for an instant guide price, then book a free survey to fix it in writing. Repairs and cleaning can often be priced from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote