West Yorkshire · Cleaning

Block paving cleaning in Castleford

For drives and patios in Castleford and Pontefract, we treat cleaning, re-sanding and sealing as one job so the paving looks good for longer.

  • Postcodes WF10, WF6, LS25
  • £2.50–£4.50 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

Planning a block paving cleaning job in Castleford

Castleford is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.

Sloping drives are common in parts of Yorkshire, which affects falls, steps and drainage at the bottom of the drive.

How much does a block paving cleaning job cost in Castleford?

Guide price in Castleford£2.50–£4.50 per m²Including VAT at 20%

Expect block paving cleaning jobs in Castleford to come in at around £2.50–£4.50 per m², including VAT at 20%. As an example, a 50 m² drive usually comes to between £115 and £225.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£4.50 per m²
Clean and re-sand£4.50–£9 per m²
Clean, re-sand and seal£7–£18 per m²
Sealing only£4.50–£14 per m²

Guide figures for Yorkshire and the Humber, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our cleaning service

Cleaning washes out some of the jointing sand, so a proper clean is followed by re-sanding with kiln-dried sand once the surface has dried. Many owners then seal the paving to lock the new sand in and keep it cleaner for longer.

  • Rotary surface clean at a pressure that will not blow out the joints
  • Kiln-dried sand brushed in once dry (re-sanding package)
  • Pre-treatment where needed
  • Rinse down of edges, steps and walls
  • Optional biocide and sealer

What we look at first in Castleford

  • Whether the paving is permeable (no sand, no sealing with the wrong product)
  • Type of block and its age
  • How much joint sand is left
  • Moss, algae, weeds and oil staining
  • Which sealer finish suits a slope or patio

From enquiry to finished paving

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

What you can expect from us

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Cleaning in Castleford: questions

How often should block paving in Castleford be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

How much does a block paving cleaning job cost in Castleford?

Guide price for Castleford: £2.50–£4.50 per m² including VAT, with a minimum charge for small areas.

Cleaning near Castleford

Nearby towns we cover for cleaning, and cleaning across West Yorkshire:

Other block paving services in Castleford

Or see all block paving services in Castleford.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Castleford.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote