Tyne and Wear · Cleaning

Block paving cleaning in Sunderland

Block paving cleaning in Sunderland: done properly, it lifts years of moss and grime and leaves the joints full and tight.

  • Postcodes SR1, SR9, SR2
  • £2.50–£4.50 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

Planning a block paving cleaning job in Sunderland

Sunderland has a big mix of housing, from older terraces near the centre to newer estates further out, so no two drives here start from the same ground.

Wind-driven rain on the North East coast makes falls and a well-filled joint more important.

How much does a block paving cleaning job cost in Sunderland?

Guide price in Sunderland£2.50–£4.50 per m²Including VAT at 20%

Guide price in Sunderland: £2.50–£4.50 per m² including VAT, which puts a 50 m² drive at about £115–£225. These are North East guide figures; the survey confirms the real price before you commit.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£4.50 per m²
Clean and re-sand£4.50–£9 per m²
Clean, re-sand and seal£7–£18 per m²
Sealing only£4.50–£14 per m²

Guide figures for the North East, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Cleaning washes out some of the jointing sand, so a proper clean is followed by re-sanding with kiln-dried sand once the surface has dried. Many owners then seal the paving to lock the new sand in and keep it cleaner for longer.

  • Pre-treatment where needed
  • Weeds and moss removed from the joints
  • Optional biocide and sealer
  • Kiln-dried sand brushed in once dry (re-sanding package)
  • Rinse down of edges, steps and walls

How we find the cause

  • Moss, algae, weeds and oil staining
  • Shade and drainage, which affect regrowth
  • Whether the paving is permeable (no sand, no sealing with the wrong product)
  • Walls, doors and planting to protect
  • Which sealer finish suits a slope or patio

From enquiry to finished paving

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

Why choose Block Paving Contractors

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Cleaning in Sunderland: questions

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

How much does a block paving cleaning job cost in Sunderland?

Guide price for Sunderland: £2.50–£4.50 per m² including VAT, with a minimum charge for small areas.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

Do you cover Washington, Houghton-le-Spring and Jarrow?

Yes. We cover Sunderland and the places around it, including Washington, Houghton-le-Spring and Jarrow, and the rest of Tyne and Wear.

Cleaning near Sunderland

Nearby towns we cover for cleaning, and cleaning across Tyne and Wear:

Other block paving services in Sunderland

Or see all block paving services in Sunderland.

Next step

Get a guide price in two minutes

Ready to talk about your block paving cleaning job? Send your postcode and a few details, and we will arrange the next step.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote