Shropshire · Cleaning

Block paving cleaning in Telford

For drives and patios in Telford and Hadley, we treat cleaning, re-sanding and sealing as one job so the paving looks good for longer.

  • Postcodes TF3, TF4, TF2
  • £2.50–£5 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

Block paving cleaning in Telford: what to expect

Telford has everything from short terrace frontages to wide drives on newer estates, so the survey sets the layout and the dig.

Inter-war semis with narrow front gardens are common in the West Midlands, so front garden conversions and drive widenings are often the practical choice.

How much does a block paving cleaning job cost in Telford?

Guide price in Telford£2.50–£5 per m²Including VAT at 20%

Most block paving cleaning job quotes in the West Midlands fall within £2.50–£5 per m² including VAT. A 50 m² drive would usually be about £125–£250, with any extras listed separately on your quote.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£5 per m²
Clean and re-sand£5–£10 per m²
Clean, re-sand and seal£8–£20 per m²
Sealing only£5–£15 per m²

Guide figures for the West Midlands, checked 9 November 2026. See all prices or use the guide price tool.

What does a block paving cleaning job involve?

Cleaning washes out some of the jointing sand, so a proper clean is followed by re-sanding with kiln-dried sand once the surface has dried. Many owners then seal the paving to lock the new sand in and keep it cleaner for longer.

  • Rinse down of edges, steps and walls
  • Weeds and moss removed from the joints
  • Kiln-dried sand brushed in once dry (re-sanding package)
  • Rotary surface clean at a pressure that will not blow out the joints
  • Pre-treatment where needed

How we find the cause

  • Which sealer finish suits a slope or patio
  • Type of block and its age
  • How much joint sand is left
  • Moss, algae, weeds and oil staining
  • Whether any blocks are loose or sunken first

What happens next

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

How we work

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Cleaning in Telford: questions

Do you cover Hadley, Wellington and Newport, Shropshire?

Yes. We cover Telford and the places around it, including Hadley, Wellington and Newport, Shropshire, and the rest of Shropshire.

How often should block paving in Telford be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

How much does a block paving cleaning job cost in Telford?

Guide price for Telford: £2.50–£5 per m² including VAT, with a minimum charge for small areas.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

Cleaning near Telford

Nearby towns we cover for cleaning, and cleaning across Shropshire:

Other block paving services in Telford

Or see all block paving services in Telford.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Telford.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote