England · Cleaning

Block paving cleaning in Nottinghamshire

Block paving cleaning in Nottinghamshire: done properly, it lifts years of moss and grime and leaves the joints full and tight.

  • 10 towns listed
  • £2.50–£5 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

How much does a block paving cleaning job cost in Nottinghamshire?

Guide price in Nottinghamshire£2.50–£5 per m²Including VAT at 20%

For Nottinghamshire, our guide is £2.50–£5 per m² including VAT, so a 50 m² drive is likely to be £125–£250. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£5 per m²
Clean and re-sand£5–£10 per m²
Clean, re-sand and seal£8–£20 per m²
Sealing only£5–£15 per m²

Guide figures for the East Midlands, checked 9 November 2026.

Towns we cover in Nottinghamshire

Choose a town for local prices and details for cleaning:

What is included?

Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.

Block drives laid twenty or thirty years ago are often ready for re-laying rather than replacing, because sound blocks outlast a weak base.

  • Rinse down of edges, steps and walls
  • Rotary surface clean at a pressure that will not blow out the joints
  • Kiln-dried sand brushed in once dry (re-sanding package)
  • Optional biocide and sealer
  • Pre-treatment where needed

How we find the cause

  • Type of block and its age
  • How much joint sand is left
  • Moss, algae, weeds and oil staining
  • Whether any blocks are loose or sunken first
  • Walls, doors and planting to protect

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Cleaning in Nottinghamshire: questions

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

How much does a block paving cleaning job cost in Nottinghamshire?

Guide price for Nottinghamshire: £2.50–£5 per m² including VAT, with a minimum charge for small areas.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

Do you cover Nottingham, Mansfield and Worksop?

Yes. We cover all of Nottinghamshire, including Nottingham, Mansfield and Worksop.

Neighbouring areas

Next step

Get a guide price in two minutes

Answer four quick questions for an instant guide price, then book a free survey to fix it in writing. Repairs and cleaning can often be priced from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote