Planning a block paving cleaning job in York
York has a big mix of housing, from older terraces near the centre to newer estates further out, so no two drives here start from the same ground.
Sloping drives are common in parts of Yorkshire, which affects falls, steps and drainage at the bottom of the drive.
How much does a block paving cleaning job cost in York?
Most block paving cleaning job quotes in Yorkshire and the Humber fall within £2.50–£4.50 per m² including VAT. A 50 m² drive would usually be about £115–£225, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Jet wash clean with a rotary cleaner | £2.50–£4.50 per m² |
| Clean and re-sand | £4.50–£9 per m² |
| Clean, re-sand and seal | £7–£18 per m² |
| Sealing only | £4.50–£14 per m² |
Guide figures for Yorkshire and the Humber, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our cleaning service
Cleaning washes out some of the jointing sand, so a proper clean is followed by re-sanding with kiln-dried sand once the surface has dried. Many owners then seal the paving to lock the new sand in and keep it cleaner for longer.
- Optional biocide and sealer
- Pre-treatment where needed
- Rotary surface clean at a pressure that will not blow out the joints
- Kiln-dried sand brushed in once dry (re-sanding package)
- Rinse down of edges, steps and walls
How we find the cause
- Whether any blocks are loose or sunken first
- Type of block and its age
- Walls, doors and planting to protect
- How much joint sand is left
- Moss, algae, weeds and oil staining
From enquiry to finished paving
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
How we work
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Cleaning in York: questions
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
How often should block paving in York be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
How much does a block paving cleaning job cost in York?
Guide price for York: £2.50–£4.50 per m² including VAT, with a minimum charge for small areas.
Do you cover Selby and Harrogate?
Yes. We cover York and the places around it, including Selby and Harrogate, and the rest of North Yorkshire.
Cleaning near York
Nearby towns we cover for cleaning, and cleaning across North Yorkshire:
