Lincolnshire · Cleaning

Block paving cleaning in Spalding

We quote block paving cleaning and care across Spalding and Lincolnshire, working from photos or a quick visit to give you a fixed price.

  • Postcodes PE11, PE12
  • £2.50–£5 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

Planning a block paving cleaning job in Spalding

In Spalding, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.

Clay and mudstone ground is common in the East Midlands, so we allow for a deeper sub-base where the survey shows soft ground.

How much does a block paving cleaning job cost in Spalding?

Guide price in Spalding£2.50–£5 per m²Including VAT at 20%

Most block paving cleaning job quotes in the East Midlands fall within £2.50–£5 per m² including VAT. A 50 m² drive would usually be about £125–£250, with any extras listed separately on your quote.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£5 per m²
Clean and re-sand£5–£10 per m²
Clean, re-sand and seal£8–£20 per m²
Sealing only£5–£15 per m²

Guide figures for the East Midlands, checked 9 November 2026. See all prices or use the guide price tool.

What does a block paving cleaning job involve?

Cleaning washes out some of the jointing sand, so a proper clean is followed by re-sanding with kiln-dried sand once the surface has dried. Many owners then seal the paving to lock the new sand in and keep it cleaner for longer.

  • Kiln-dried sand brushed in once dry (re-sanding package)
  • Rotary surface clean at a pressure that will not blow out the joints
  • Optional biocide and sealer
  • Rinse down of edges, steps and walls
  • Pre-treatment where needed

How we find the cause

  • Type of block and its age
  • Whether the paving is permeable (no sand, no sealing with the wrong product)
  • Moss, algae, weeds and oil staining
  • How much joint sand is left
  • Shade and drainage, which affect regrowth

From enquiry to finished paving

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

What you can expect from us

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Cleaning in Spalding: questions

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

How much does a block paving cleaning job cost in Spalding?

Guide price for Spalding: £2.50–£5 per m² including VAT, with a minimum charge for small areas.

How often should block paving in Spalding be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

Cleaning near Spalding

Nearby towns we cover for cleaning, and cleaning across Lincolnshire:

Other block paving services in Spalding

Or see all block paving services in Spalding.

Next step

Get a guide price in two minutes

Ready to talk about your block paving cleaning job? Send your postcode and a few details, and we will arrange the next step.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote