Block paving cleaning in Wigston: the local picture
Homes in Wigston include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.
Block drives laid twenty or thirty years ago are often ready for re-laying rather than replacing, because sound blocks outlast a weak base.
How much does a block paving cleaning job cost in Wigston?
For Wigston, our guide is £2.50–£5 per m² including VAT, so a 50 m² drive is likely to be £125–£250. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
| Sealing only | £5–£15 per m² |
Guide figures for the East Midlands, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paving cleaning job involve?
Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.
- Pre-treatment where needed
- Optional biocide and sealer
- Rinse down of edges, steps and walls
- Weeds and moss removed from the joints
- Rotary surface clean at a pressure that will not blow out the joints
Before we price your block paving cleaning job
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- Whether any blocks are loose or sunken first
- How much joint sand is left
- Moss, algae, weeds and oil staining
- Which sealer finish suits a slope or patio
What happens next
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
What you can expect from us
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Cleaning in Wigston: questions
Do you cover Oadby, Leicester and Hinckley?
Yes. We cover Wigston and the places around it, including Oadby, Leicester and Hinckley, and the rest of Leicestershire.
How often should block paving in Wigston be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
How much does a block paving cleaning job cost in Wigston?
Guide price for Wigston: £2.50–£5 per m² including VAT, with a minimum charge for small areas.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Cleaning near Wigston
Nearby towns we cover for cleaning, and cleaning across Leicestershire:
- Cleaning in Oadby
- Cleaning in Leicester
- Cleaning in Hinckley
- Cleaning in Loughborough
- Cleaning in Coalville
- Cleaning in Melton Mowbray

