Scotland · Cleaning

Block paving cleaning in Lanarkshire

We quote block paving cleaning and care across Lanarkshire and Lanarkshire, working from photos or a quick visit to give you a fixed price.

  • 13 towns listed
  • £2.50–£5 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

How much does a block paving cleaning job cost in Lanarkshire?

Guide price in Lanarkshire£2.50–£5 per m²Including VAT at 20%

For Lanarkshire, our guide is £2.50–£5 per m² including VAT, so a 50 m² drive is likely to be £125–£250. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£5 per m²
Clean and re-sand£5–£10 per m²
Clean, re-sand and seal£8–£20 per m²
Sealing only£5–£15 per m²

Guide figures for Scotland, checked 9 November 2026.

Towns we cover in Lanarkshire

Choose a town for local prices and details for cleaning:

What does a block paving cleaning job involve?

Cleaning washes out some of the jointing sand, so a proper clean is followed by re-sanding with kiln-dried sand once the surface has dried. Many owners then seal the paving to lock the new sand in and keep it cleaner for longer.

Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.

  • Kiln-dried sand brushed in once dry (re-sanding package)
  • Rinse down of edges, steps and walls
  • Rotary surface clean at a pressure that will not blow out the joints
  • Pre-treatment where needed
  • Weeds and moss removed from the joints

How we find the cause

  • Whether the paving is permeable (no sand, no sealing with the wrong product)
  • Shade and drainage, which affect regrowth
  • Whether any blocks are loose or sunken first
  • How much joint sand is left
  • Moss, algae, weeds and oil staining

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Cleaning in Lanarkshire: questions

How much does a block paving cleaning job cost in Lanarkshire?

Guide price for Lanarkshire: £2.50–£5 per m² including VAT, with a minimum charge for small areas.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

How often should block paving in Lanarkshire be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Neighbouring areas

Next step

Get a guide price in two minutes

Answer four quick questions for an instant guide price, then book a free survey to fix it in writing. Repairs and cleaning can often be priced from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote