Greater Manchester · Cleaning

Block paving cleaning in Denton

We clean, re-sand and seal block paving across Denton (M34), using a rotary cleaner at a pressure that will not damage the blocks.

  • Postcodes M34
  • £2.50–£5 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

Block paving cleaning in Denton: what to expect

Homes in Denton include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.

Terraced streets across the North West often have very short frontages, so we check parking depth before quoting a conversion.

How much does a block paving cleaning job cost in Denton?

Guide price in Denton£2.50–£5 per m²Including VAT at 20%

Expect block paving cleaning jobs in Denton to come in at around £2.50–£5 per m², including VAT at 20%. As an example, a 50 m² drive usually comes to between £125 and £250.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£5 per m²
Clean and re-sand£5–£10 per m²
Clean, re-sand and seal£8–£20 per m²
Sealing only£5–£15 per m²

Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Cleaning washes out some of the jointing sand, so a proper clean is followed by re-sanding with kiln-dried sand once the surface has dried. Many owners then seal the paving to lock the new sand in and keep it cleaner for longer.

  • Kiln-dried sand brushed in once dry (re-sanding package)
  • Optional biocide and sealer
  • Weeds and moss removed from the joints
  • Rinse down of edges, steps and walls
  • Pre-treatment where needed

What we look at first in Denton

  • Moss, algae, weeds and oil staining
  • Whether the paving is permeable (no sand, no sealing with the wrong product)
  • How much joint sand is left
  • Shade and drainage, which affect regrowth
  • Which sealer finish suits a slope or patio

From enquiry to finished paving

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

Why choose Block Paving Contractors

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Cleaning in Denton: questions

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

How often should block paving in Denton be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

How much does a block paving cleaning job cost in Denton?

Guide price for Denton: £2.50–£5 per m² including VAT, with a minimum charge for small areas.

Do you cover Hyde, Droylsden and Ashton-under-Lyne?

Yes. We cover Denton and the places around it, including Hyde, Droylsden and Ashton-under-Lyne, and the rest of Greater Manchester.

Cleaning near Denton

Nearby towns we cover for cleaning, and cleaning across Greater Manchester:

Other block paving services in Denton

Or see all block paving services in Denton.

Next step

Get a guide price in two minutes

Ready to talk about your block paving cleaning job? Send your postcode and a few details, and we will arrange the next step.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote