Planning a block paving cleaning job in Dunblane
Dunblane is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.
In Scotland, front paving must be porous or drain within the property whatever its size, so drainage is part of every design.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
How much does a block paving cleaning job cost in Dunblane?
For Dunblane, our guide is £2.50–£5 per m² including VAT, so a 50 m² drive is likely to be £125–£250. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
| Sealing only | £5–£15 per m² |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our cleaning service
Cleaning washes out some of the jointing sand, so a proper clean is followed by re-sanding with kiln-dried sand once the surface has dried. Many owners then seal the paving to lock the new sand in and keep it cleaner for longer.
- Rinse down of edges, steps and walls
- Optional biocide and sealer
- Rotary surface clean at a pressure that will not blow out the joints
- Pre-treatment where needed
- Weeds and moss removed from the joints
What we look at first in Dunblane
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- Moss, algae, weeds and oil staining
- Shade and drainage, which affect regrowth
- Which sealer finish suits a slope or patio
- Whether any blocks are loose or sunken first
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
How we work
Repair before replace
If your drive can be fixed or re-laid, we will say so.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Cleaning in Dunblane: questions
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
How much does a block paving cleaning job cost in Dunblane?
Guide price for Dunblane: £2.50–£5 per m² including VAT, with a minimum charge for small areas.
How often should block paving in Dunblane be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Do you cover Stirling, Alloa and Stenhousemuir?
Yes. We cover Dunblane and the places around it, including Stirling, Alloa and Stenhousemuir, and the rest of the Forth Valley.
Cleaning near Dunblane
Nearby towns we cover for cleaning, and cleaning across Forth Valley:
- Cleaning in Stirling
- Cleaning in Alloa
- Cleaning in Stenhousemuir
- Cleaning in Falkirk
- Cleaning in Grangemouth
- Cleaning in Bo'ness
