Planning a block paving cleaning job in Chelmsford
Across Chelmsford, front gardens range from narrow terrace plots to broad modern drives, and the best block, pattern and drainage choice changes with them.
Flat ground across much of the East means falls have to be built in carefully so water does not sit on the drive.
How much does a block paving cleaning job cost in Chelmsford?
Most block paving cleaning job quotes in the East of England fall within £2.50–£5.50 per m² including VAT. A 50 m² drive would usually be about £130–£265, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Jet wash clean with a rotary cleaner | £2.50–£5.50 per m² |
| Clean and re-sand | £5.50–£11 per m² |
| Clean, re-sand and seal | £8.50–£20 per m² |
| Sealing only | £5.50–£16 per m² |
Guide figures for the East of England, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Cleaning washes out some of the jointing sand, so a proper clean is followed by re-sanding with kiln-dried sand once the surface has dried. Many owners then seal the paving to lock the new sand in and keep it cleaner for longer.
- Weeds and moss removed from the joints
- Optional biocide and sealer
- Kiln-dried sand brushed in once dry (re-sanding package)
- Rotary surface clean at a pressure that will not blow out the joints
- Rinse down of edges, steps and walls
How we find the cause
- Walls, doors and planting to protect
- Type of block and its age
- How much joint sand is left
- Which sealer finish suits a slope or patio
- Whether the paving is permeable (no sand, no sealing with the wrong product)
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Why choose Block Paving Contractors
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Cleaning in Chelmsford: questions
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
How often should block paving in Chelmsford be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
How much does a block paving cleaning job cost in Chelmsford?
Guide price for Chelmsford: £2.50–£5.50 per m² including VAT, with a minimum charge for small areas.
Cleaning near Chelmsford
Nearby towns we cover for cleaning, and cleaning across Essex:
- Cleaning in Billericay
- Cleaning in Witham
- Cleaning in Maldon
- Cleaning in Wickford
- Cleaning in Braintree
- Cleaning in Brentwood
