Block paving cleaning in Basildon: what to expect
Basildon has a big mix of housing, from older terraces near the centre to newer estates further out, so no two drives here start from the same ground.
Flat ground across much of the East means falls have to be built in carefully so water does not sit on the drive.
How much does a block paving cleaning job cost in Basildon?
Most block paving cleaning job quotes in the East of England fall within £2.50–£5.50 per m² including VAT. A 50 m² drive would usually be about £130–£265, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Jet wash clean with a rotary cleaner | £2.50–£5.50 per m² |
| Clean and re-sand | £5.50–£11 per m² |
| Clean, re-sand and seal | £8.50–£20 per m² |
| Sealing only | £5.50–£16 per m² |
Guide figures for the East of England, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paving cleaning job involve?
Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.
- Rinse down of edges, steps and walls
- Weeds and moss removed from the joints
- Pre-treatment where needed
- Rotary surface clean at a pressure that will not blow out the joints
- Optional biocide and sealer
How we find the cause
- Moss, algae, weeds and oil staining
- Which sealer finish suits a slope or patio
- How much joint sand is left
- Type of block and its age
- Whether the paving is permeable (no sand, no sealing with the wrong product)
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Why choose Block Paving Contractors
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Cleaning in Basildon: questions
Do you cover Pitsea, Stanford-le-Hope and Wickford?
Yes. We cover Basildon and the places around it, including Pitsea, Stanford-le-Hope and Wickford, and the rest of Essex.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
How often should block paving in Basildon be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Cleaning near Basildon
Nearby towns we cover for cleaning, and cleaning across Essex:
- Cleaning in Pitsea
- Cleaning in Stanford-le-Hope
- Cleaning in Wickford
- Cleaning in Billericay
- Cleaning in South Benfleet
- Cleaning in Canvey Island
