How much does a block paving cleaning job cost in Cumbria?
Most block paving cleaning job quotes in the North West fall within £2.50–£5 per m² including VAT. A 50 m² drive would usually be about £125–£250, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
| Sealing only | £5–£15 per m² |
Guide figures for the North West, checked 9 November 2026.
Towns we cover in Cumbria
Choose a town for local prices and details for cleaning:
What is included?
Cleaning washes out some of the jointing sand, so a proper clean is followed by re-sanding with kiln-dried sand once the surface has dried. Many owners then seal the paving to lock the new sand in and keep it cleaner for longer.
The North West is one of the wetter parts of England, so falls, channel drains and permeable options matter more than usual.
- Optional biocide and sealer
- Pre-treatment where needed
- Kiln-dried sand brushed in once dry (re-sanding package)
- Rinse down of edges, steps and walls
- Rotary surface clean at a pressure that will not blow out the joints
How we find the cause
- Type of block and its age
- How much joint sand is left
- Which sealer finish suits a slope or patio
- Shade and drainage, which affect regrowth
- Whether the paving is permeable (no sand, no sealing with the wrong product)
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Cleaning in Cumbria: questions
How much does a block paving cleaning job cost in Cumbria?
Guide price for Cumbria: £2.50–£5 per m² including VAT, with a minimum charge for small areas.
How often should block paving in Cumbria be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
