County Down · Cleaning

Block paving cleaning in Warrenpoint

Block paving cleaning in Warrenpoint: done properly, it lifts years of moss and grime and leaves the joints full and tight.

  • Postcodes BT34
  • £2.50–£5 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

Block paving cleaning in Warrenpoint: the local picture

Warrenpoint is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.

Wet winters in Northern Ireland make falls, edge restraints and full joints especially important.

How much does a block paving cleaning job cost in Warrenpoint?

Guide price in Warrenpoint£2.50–£5 per m²Including VAT at 20%

For Warrenpoint, our guide is £2.50–£5 per m² including VAT, so a 50 m² drive is likely to be £120–£240. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£5 per m²
Clean and re-sand£5–£9.50 per m²
Clean, re-sand and seal£7.50–£19 per m²
Sealing only£5–£14 per m²

Guide figures for Northern Ireland, checked 9 November 2026. See all prices or use the guide price tool.

What does a block paving cleaning job involve?

Cleaning washes out some of the jointing sand, so a proper clean is followed by re-sanding with kiln-dried sand once the surface has dried. Many owners then seal the paving to lock the new sand in and keep it cleaner for longer.

  • Optional biocide and sealer
  • Rotary surface clean at a pressure that will not blow out the joints
  • Weeds and moss removed from the joints
  • Kiln-dried sand brushed in once dry (re-sanding package)
  • Pre-treatment where needed

How we find the cause

  • How much joint sand is left
  • Shade and drainage, which affect regrowth
  • Whether any blocks are loose or sunken first
  • Whether the paving is permeable (no sand, no sealing with the wrong product)
  • Type of block and its age

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

What you can expect from us

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Cleaning in Warrenpoint: questions

Do you cover Newry, Newcastle and Banbridge?

Yes. We cover Warrenpoint and the places around it, including Newry, Newcastle and Banbridge, and the rest of County Down.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

How often should block paving in Warrenpoint be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

How much does a block paving cleaning job cost in Warrenpoint?

Guide price for Warrenpoint: £2.50–£5 per m² including VAT, with a minimum charge for small areas.

Cleaning near Warrenpoint

Nearby towns we cover for cleaning, and cleaning across County Down:

Other block paving services in Warrenpoint

Or see all block paving services in Warrenpoint.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Warrenpoint, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote