Northern Ireland · Cleaning

Block paving cleaning in County Armagh

For drives and patios in County Armagh and Craigavon, we treat cleaning, re-sanding and sealing as one job so the paving looks good for longer.

  • 3 towns listed
  • £2.50–£5 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

How much does a block paving cleaning job cost in County Armagh?

Guide price in County Armagh£2.50–£5 per m²Including VAT at 20%

Most block paving cleaning job quotes in Northern Ireland fall within £2.50–£5 per m² including VAT. A 50 m² drive would usually be about £120–£240, with any extras listed separately on your quote.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£5 per m²
Clean and re-sand£5–£9.50 per m²
Clean, re-sand and seal£7.50–£19 per m²
Sealing only£5–£14 per m²

Guide figures for Northern Ireland, checked 9 November 2026.

Towns we cover in County Armagh

Choose a town for local prices and details for cleaning:

What is included?

Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.

Dropped kerbs in Northern Ireland go through DfI Roads, so we build that timing into the plan for new drives.

  • Optional biocide and sealer
  • Rotary surface clean at a pressure that will not blow out the joints
  • Kiln-dried sand brushed in once dry (re-sanding package)
  • Pre-treatment where needed
  • Rinse down of edges, steps and walls

How we find the cause

  • Whether the paving is permeable (no sand, no sealing with the wrong product)
  • Shade and drainage, which affect regrowth
  • Which sealer finish suits a slope or patio
  • Walls, doors and planting to protect
  • Moss, algae, weeds and oil staining

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Cleaning in County Armagh: questions

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

How often should block paving in County Armagh be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Do you cover Craigavon, Portadown and Armagh?

Yes. We cover all of County Armagh, including Craigavon, Portadown and Armagh.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

Neighbouring areas

Next step

Get a guide price in two minutes

Answer four quick questions for an instant guide price, then book a free survey to fix it in writing. Repairs and cleaning can often be priced from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote