County Antrim · Cleaning

Block paving cleaning in Antrim

Block paving cleaning in Antrim: done properly, it lifts years of moss and grime and leaves the joints full and tight.

  • Postcodes BT41, BT29
  • £2.50–£5 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

Block paving cleaning in Antrim: the local picture

In and around Antrim, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.

Wet winters in Northern Ireland make falls, edge restraints and full joints especially important.

How much does a block paving cleaning job cost in Antrim?

Guide price in Antrim£2.50–£5 per m²Including VAT at 20%

For Antrim, our guide is £2.50–£5 per m² including VAT, so a 50 m² drive is likely to be £120–£240. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£5 per m²
Clean and re-sand£5–£9.50 per m²
Clean, re-sand and seal£7.50–£19 per m²
Sealing only£5–£14 per m²

Guide figures for Northern Ireland, checked 9 November 2026. See all prices or use the guide price tool.

What does a block paving cleaning job involve?

Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.

  • Rinse down of edges, steps and walls
  • Rotary surface clean at a pressure that will not blow out the joints
  • Pre-treatment where needed
  • Kiln-dried sand brushed in once dry (re-sanding package)
  • Optional biocide and sealer

How we find the cause

  • Whether any blocks are loose or sunken first
  • Walls, doors and planting to protect
  • Which sealer finish suits a slope or patio
  • Whether the paving is permeable (no sand, no sealing with the wrong product)
  • How much joint sand is left

What happens next

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

What you can expect from us

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Cleaning in Antrim: questions

How often should block paving in Antrim be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

How much does a block paving cleaning job cost in Antrim?

Guide price for Antrim: £2.50–£5 per m² including VAT, with a minimum charge for small areas.

Do you cover Ballyclare, Ballymena and Newtownabbey?

Yes. We cover Antrim and the places around it, including Ballyclare, Ballymena and Newtownabbey, and the rest of County Antrim.

Cleaning near Antrim

Nearby towns we cover for cleaning, and cleaning across County Antrim:

Other block paving services in Antrim

Or see all block paving services in Antrim.

Next step

Get a guide price in two minutes

Ready to talk about your block paving cleaning job? Send your postcode and a few details, and we will arrange the next step.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote