Block paving cleaning in High Wycombe: the local picture
High Wycombe has a big mix of housing, from older terraces near the centre to newer estates further out, so no two drives here start from the same ground.
Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.
How much does a block paving cleaning job cost in High Wycombe?
For High Wycombe, our guide is £2.50–£5.50 per m² including VAT, so a 50 m² drive is likely to be £135–£270. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Jet wash clean with a rotary cleaner | £2.50–£5.50 per m² |
| Clean and re-sand | £5.50–£11 per m² |
| Clean, re-sand and seal | £8.50–£20 per m² |
| Sealing only | £5.50–£16 per m² |
Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our cleaning service
Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.
- Kiln-dried sand brushed in once dry (re-sanding package)
- Optional biocide and sealer
- Rotary surface clean at a pressure that will not blow out the joints
- Pre-treatment where needed
- Weeds and moss removed from the joints
Before we price your block paving cleaning job
- Shade and drainage, which affect regrowth
- Which sealer finish suits a slope or patio
- Moss, algae, weeds and oil staining
- Type of block and its age
- How much joint sand is left
From enquiry to finished paving
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Why choose Block Paving Contractors
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Cleaning in High Wycombe: questions
Do you cover Amersham, Chesham and Chalfont St Peter?
Yes. We cover High Wycombe and the places around it, including Amersham, Chesham and Chalfont St Peter, and the rest of Buckinghamshire.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
How often should block paving in High Wycombe be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Cleaning near High Wycombe
Nearby towns we cover for cleaning, and cleaning across Buckinghamshire:
- Cleaning in Amersham
- Cleaning in Chesham
- Cleaning in Chalfont St Peter
- Cleaning in Gerrards Cross
- Cleaning in Aylesbury
