Block paving cleaning in Reading: what to expect
Reading has everything from short terrace frontages to wide drives on newer estates, so the survey sets the layout and the dig.
Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.
How much does a block paving cleaning job cost in Reading?
For Reading, our guide is £2.50–£5.50 per m² including VAT, so a 50 m² drive is likely to be £135–£270. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Jet wash clean with a rotary cleaner | £2.50–£5.50 per m² |
| Clean and re-sand | £5.50–£11 per m² |
| Clean, re-sand and seal | £8.50–£20 per m² |
| Sealing only | £5.50–£16 per m² |
Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Cleaning washes out some of the jointing sand, so a proper clean is followed by re-sanding with kiln-dried sand once the surface has dried. Many owners then seal the paving to lock the new sand in and keep it cleaner for longer.
- Pre-treatment where needed
- Optional biocide and sealer
- Rotary surface clean at a pressure that will not blow out the joints
- Weeds and moss removed from the joints
- Rinse down of edges, steps and walls
What we look at first in Reading
- Moss, algae, weeds and oil staining
- Shade and drainage, which affect regrowth
- Whether any blocks are loose or sunken first
- How much joint sand is left
- Which sealer finish suits a slope or patio
What happens next
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
What you can expect from us
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Cleaning in Reading: questions
How much does a block paving cleaning job cost in Reading?
Guide price for Reading: £2.50–£5.50 per m² including VAT, with a minimum charge for small areas.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Do you cover Earley, Wokingham and Crowthorne?
Yes. We cover Reading and the places around it, including Earley, Wokingham and Crowthorne, and the rest of Berkshire.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Cleaning near Reading
Nearby towns we cover for cleaning, and cleaning across Berkshire:
- Cleaning in Earley
- Cleaning in Wokingham
- Cleaning in Crowthorne
- Cleaning in Bracknell
- Cleaning in Sandhurst
- Cleaning in Maidenhead
